info@jonesmachinery.com 800-766-0024 513-825-5000

TRAK DPMS3 Bed Mill

  • 1243
1243

Description

2003 TRAK DPMS3 Bed Mill with the ProtoTRAK SM CNC

Specifications

DPMS3 Machine Specifications

·       Table Size - 50” x 10”

·       T-Slots - 3 x .63” x 2.48”

·       Travel  (X,Y,Z) - 30” x 17” x 23.5”

·       Maximum Quill Travel - 5”

·       Quill Diameter - 3 15/16”

·       Spindle Taper - NST 40

·       Spindle Speed Range - 70-4200 rpm

·       Spindle Center to Column Face - 19”

·       Spindle Motor - 3HP

·       Power Requirement Control - 110V; 1P; 10A

·       Power Requirement Machine - 220/440V; 3P; 8.5/4.25A

·       Maximum Weight on Table - 1320 lb.

·       Height of table from bottom of bed - 38”

·       Maximum spindle nose to table - 23.5”

·       Minimum height - 85”

·       Maximum height - 95”

·       Width of machine including table - 73”

·       Length with electric box door closed - 76”

·       Overall width including full table traverse - 108”

·       Overall length with electrical door open - 70”

·       Footprint of machine - 24” x 44”

·       Weight net/shipping lbs. - 4100/4400

·       Maximum work capacities in mild steel - drilling, 1” dia.; tapping, ¾”; milling, 3 in3/min

·       Maximum rapid feed - 150 IPM

·       Wide way surfaces are hardened and ground

·       Slide ways Turcite coated

·       Precision ground ballscrews installed in the table, ram and column

·       Solid ram moves up and down for Z-axis operation, providing mass for heavy cuts

·       Real handwheels so you can work manually

 

 

 

ProtoTRAK SM CNC - the control on the TRAK S Series Bed Mill

Hardware Specifications

·       Two or three-axis CNC, three-axis DRO

·       Pentium processor with built-in video and Ethernet cards

·       32 MB or RAM with expansion slots available

·       Flash drive

·       TEAC floppy disk drive

·       Ports and connectors: P/S 2 keyboard and mouse, RS232, RJ45

·       10.4” color active-matrix display

·       Override of programmed feedrate and rapid with graphical indicator

·       Polycarbonate sealed membrane with LED status lights

·       Gasket sealed enclosures

·       Servo motors - 560 in-oz torque

·       Integrated ram and quill encoders

 

Software Specifications

·       Windows operating system

·       Selectable two or three-axis CNC

·       Auto Geometry Engine

·       Automatic diameter cutter compensation

·       Two or three-axis circular interpolation

·       Rotate

·       Look - Program graphics with a single button push

·       Linear interpolation

·       Six modes of operation

·       Color graphics with adjustable views

·       Tool length offset with modifiers

·       Advanced diagnostic routines

·       Jog and Powerfeed in DRO mode

·       Automatic return to ABS zero

·       Incremental and Absolute position readout

·       Inch/mm selectable

·       Teach-in of manual moves.

·       Alpha-numeric program names

·       Scaling of print data

·       Event comments

·       Selectable Tool Path or Part Geometry programming

·       Convenient canned cycles for all geometry

·       Circular, rectangular or irregular pockets, islands and profiles

·       Helix and thread milling routines

·       Subroutine and copy of programmed events

·       Mirror with selectable cutting order

·       List step - graphics with programmed events displayed

·       Conrad - one input for automatic corner radius

·       Incremental and Absolute programming

·       Program diagnostics

·       CAD/CAM interface

·       Math Helps with prompted, graphical interface

·       Tool stepover adjustable for pocket routines

 

 

 

 

 

·       Selectable ramp or plunge cutter entry

·       Spreadsheet editing

·       Global data change

·       Clipboard to copy events between programs

·       Trial run

·       Real time run graphics with tool icon

·       Access to networked drives

·       Automatic file back up routine

·       Program converters

Get a Quote

Related Products

Sorry, No Related Products Available

Please click here for printable specs