info@jonesmachinery.com 800-766-0024 513-825-5000

Stamtec iS1 Series

  • iS1_200_main-0.png
iS1_200_main-0.png

Description

IS1 SERIES

NEW Stamtec iS1 Series - Direct Drive Servo Press (Powered by Siemens). 

Stamtec’s Servo Motor Drive Technology, the standard electric motor, flywheel, and clutch/brake are replaced with a high-torque, low-rpm servo motor.  Proprietary press controls specifically designed for the servo press to achieve a wide variety of stroke lengths and slide movement profiles, while supplying full working energy capacity even at low speeds. This allows the user to perform a wide variety of jobs in one press (e.g. drawing, re-strike, warm forming, etc.) and easily adapt to automation and feed applications. In addition, user-defined motion curves allow up to 20 various segments in a cycle curve, defined by slide position, speed, and pause duration parameters. 

Tonnage Range: 88 - 286

 

Specifications

MODEL iS1-80 SPECIFICATIONS
Type   D C
Capacity US Tons 88 88
Metric Tons 80 80
Rated tonnage point in. 0.20 0.20
mm 5 5
Stroke length in. 7.09 7.09
mm 180 180
Speed SPM ~ 80 ~ 80
Die height in. 13.78 13.78
mm 350 350
Slide area (L-R X F-B) in. 27.56 x 18.11 27.56 x 18.11
mm 700 x 460 700 x 460
Bolster area (L-R X F-B) in. 35.43 x 23.62 46.06 x 23.62
mm 900 x 600 1170 x 600
Bolster thickness in. 3.94 3.94
mm 100 100
Side frame opening (window)
(F-B x H)
in. 25.59 x 18.11 --
mm 650 x 460 --
Maximum die weight lbs. 13.58 13.58
Kgs 345 345
Slide adjustment in. 3.15 3.15
mm 80 80
Slide adjusting motor Kw x p 0.4 x 4 0.4 x 4
Working height in. 32.68 32.68
mm 830 830
Air pressure required PSI 71.12 71.12
kg / cm2 5 5
Get a Quote

Related Products

Sorry, No Related Products Available