info@jonesmachinery.com 800-766-0024 513-825-5000

Mitsubishi MV2400-ST Advance

  • MV2400-ST.jpg
MV2400-ST.jpg

Description

MV2400-ST is now capable of submerged cutting up to 16.5 inches deep with full support of the best auto threading system on the market today.  With an annealing length of over 18 inches this system is capable of threading the maximum workpiece height both at the start point and through the gap if needed for a broken wire recovery.  The MV2400-ST features a new, non-contact cylindrical drive system and the M700 series control with a 15-inch touchscreen. With advancements in machine construction and power supply technology, the MV2400-ST is sure to revolutionize EDM machining and increase your shop's productivity.

Specifications

Machine Travels: X x Y x Z in (mm) 23.6 x 15.7 x 16.5 (600 x 400 x 425)
Maximum Workpiece Dimensions: W x D x H in (mm) 41.3 x 32.3 x 16.3 (1050 x 820 x 420)
Max. Submerged Workpiece Weight: lb (kg) 3300 (1500)
Table Dimensions: in (mm) 33.0 x 25.2 (840 x 640)
U/V Travels (from center): in (mm) ±3.0 x ±3.0 (±75 x ±75)
Taper Angle @ Thickness: in (mm) 15 deg.@ 10.2 (15 deg.@ 260)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 2.4" (No AT Possible)
Table Rapid Feed Speed: in/min (mm/min) 51.2 (1300)
Power Supply V350-V
Minimum Drive Unit / Resolution 0.00001 / 2 millionths (0.0001 / 0.05µm)
User Program Storage [Hard Disk Size] 1GB [20 GB]
Wire Diameter Possible: in (mm) 0.004~0.012 (0.1~0.3)
Minimum Start Hole Diameter: in (mm) 0.02 (0.5)
Max. Wire Spool size STD [optional]: lb (kg) 22 [44] (10 [20])
Filters / Type 2 / Paper
Filter Tank Capacity: gal (L) 260 (985)
Machine System Dimensions: in (mm) 111.7 x 137.4 (2837 x 3490)
Machine Installed Height: in (mm) 93.7 (2380)
Machine System Weight: lb (kg) 9500 (4300)
Fluid System Weight: lb (kg) 880 (400)
Power Requirements [KVA] 200-230V [13.5] Built in AVR
Compressed Air Requirements 2.7 cu.ft./min. @ 71~100 psi
Get a Quote

Related Products

Sorry, No Related Products Available