info@jonesmachinery.com 800-766-0024 513-825-5000

Mitsubishi EA28V Advance

  • EA28V Advance.jpg
EA28V Advance.jpg

Description

The new EA28V Advance allows for the high-speed machining of tungsten carbide with copper tungsten electrodes. The new machine houses the standard V-series power supply which reduces electrode wear by as much as 50 percent when machining tungsten carbide. The Mitsubishi EA28V Advance features the new M700 series control with a 15-inch touchscreen. And the FP120V energy-saving power supply reduces electrical consumption by 20 percent compared to the previous FP model. 

Specifications

Machine Travels: X x Y x Z in (mm) 25.6 x 17.7 x 13.8 (650 x 450 x 350)
Maximum Workpiece Size: W x D x H in (mm) 41.3 x 29.9 x 13.8 (1050 x 760 x 350)
Max Dielectric Fluid Level: in (mm) 15.7 (400)
Power Supply (Option) / Peak Current FP80V (80 Peak) FP120V (120 Peak)
Internal Worktank Dimensions W x D x H in (mm) 43.3 x 31.9 x 17.7 (1100 x 810 x 450)
Worktank / Door Type 3-Sided Drop Ttank
Max. Workpiece Weight: lb (kg) 4400 (2000)
Table Dimensions W x D: in (mm) 33.4 x 23.6 (850 x 600)
Max. Electrode Weight: lb (kg) 440 (200)
Table to C-Axis Chuck Distance Min ~ Max: in (mm) 11.8 ~ 25.6 (300 ~ 650) 3R-MACRO Chuck
Minimum Command Unit / Resolution: in (mm) .00001 / .000002 (.0001 / .00005)
Rapid Travel Speed: in/min. (mm/min.) 78.7 (2000)
High-Speed Jump Maximum: in/min. (m/min.) 393 (10)
Filters / Type 3 pc. / Paper Cartridge
Filter Tank Capacity: gal (L) 157 (595)
Machine System Dimensions W x D: in (mm) 86.4 x 98.9 (2195 x 2512)
Machine Installed Height: in (mm) 103 (2615)
Machine System Weight: lb (kg) 11,904 (5400)
C-Axis Min. Indexing Angle / Drive Unit .001º / .001º
C-Axis RPM Range 1 ~ 20
Fluid Temp. Control Chiller Standard
Optional Internal Spindle RPM Range 1 ~ 1500
Automatic Tool Changer Options MVH 20 / 40
Power Requirements [KVA] 200/220 VAC +/- 5% [16.5]
Compressed Air Requirements 2.7 cu.ft./min @ 90-100 psi
Get a Quote

Related Products

Sorry, No Related Products Available