info@jonesmachinery.com 800-766-0024 513-825-5000

K3 EMX

  • ProtoTRAK K3 EMX
  • EMX Control
ProtoTRAK K3 EMX EMX Control

Description

TRAK K3 EMX Knee Mill
with the ProtoTRAK EMX CNC

ProtoTRAK EMX CNC

Control Hardware Specifications

  • Two-axis CNC, three-axis DRO
  • Digital Servo Amplifiers – custom designed for ProtoTRAK operation
  • D.C. Servo Motors – rated at 280 in-oz. Continuous torque are twice that required
  • Precision Ground Ball Screws – in the table and saddle
  • Modular Design – simplifies service and maximized uptime
  • 115V/60HZ/15 amps
  • Feedrate Override of programmed feedrate and rapid
  • Polycarbonate Sealed Membrane Keypad and Gasket Sealed Control
  • Enclosures to lock out contamination
  • 2 USB ports for interface with a storage device
  • 7.0” color LCD with adjustable contrast
  • Rugged Industrial PC

 

Software Features – General Operation

·         Clear, uncluttered screen display

·         Prompted data inputs

·         English language – no codes

·         Soft keys - change within context

·         Windows® operating system

·         Selectable two or three-axis CNC

·         Color graphics with adjustable views

·         Inch/mm selectable

·         Convenient modes of operation

 

Programmed Canned Cycles

  • Posn/Drill – single point
  • Bolt Hole – series of points evenly spaced around a circle
  • Mill – straight line in any direction
  • Arc – any portion of a circle
  • Pocket – a rectangle or circle and all the material inside, includes finish cut
  • Frame – a perimeter of a rectangle or circle, includes finish cut
  • Repeat – of programmed events with or without offset

 

Service

  • The SWI Customer Service Group provides after-sale support over the telephone via a toll-free service number - (800) 367-3165.
  • Machine design makes self-service easy for when the customer is able to resolve the problem.
  • Express Exchange program in which nearly all electronic and mechanical sub-assemblies are in stock.
  • In response to a problem, any parts you need may be shipped to arrive the next day.

 

Available Options/Accessories

 

  • Off-line Programming for running the ProtoTRAK software on the PC
  • Remote Stop/Go (RSG) switch
  • Power Drawbar
  • Halogen Worklamp
  • Chip Pan
  • Riser Block
  • Knee Power Feed
  • Coolant Pump

Specifications

TRAK K3 EMX Machine Specifications

 

  • Table Size –50” X 10”
  • T-Slots – 5/8” x 3 x 2 ½”
  • Table Travel – 32”
  • Saddle Travel – 15.5”
  • Knee Travel – 16”
  • Ram Travel – 24”
  • Maximum Quill Travel – 5”
  • Quill Diameter – 3 3/8”
  • Spindle Taper – R8
  • Spindle Speed Range – 60-4200 RPM
  • Head Tilt – 45 deg. forward, 45 deg. back, 90 deg. left, 90 deg. right
  • Spindle Motor – 3 HP
  • Power Requirement Control – 110V; 1P; 10A
  • Power Requirement Machine – 220/440V; 3P; 8.5/4.25A
  • Maximum Weight on Table – 750 lbs.
  • Machine Weight – 2816 lbs.
  • Machine dims l,w,h, - 71” x 59” x 84”
  • Maximum rapid feed – 100 IPM
  • Way surface type – Dovetail X, Z Square Y
  • Precision 7207 CP4 spindle bearings
  • Chrome hardened and ground quill
  • Meehanite castings
  • Slide ways are Turcite coated
  • Wide way surfaces are hardened and ground
Get a Quote

Related Products

Please click here for printable specs