info@jonesmachinery.com 800-766-0024 513-825-5000

FSG-1224ADIII

  • FSG-1224ADIII
FSG-1224ADIII

Description

FSG-1224ADIII•1632ADIII•1640ADIII
High-Precision 3-Axes Automatic Surface Grinder

The FSG-ADIII series features a new user-friendly touch-screen control with standard surface grinding programs and a plunge grinding cycle. There is also an optional crisscross or zigzag and a CBN dressing cycle. So simple and user-friendly, all skill levels can operate this series of ADIII controllers.

The fully automatic grinding mode consists of rough- and fine-grinding cycles, switching from rough-grinding down-feed increments to fine-grinding down-feed increments at preset points during the cycle. This crossfeed also switches from a rough to fine cross-feed increment, which results in a finer surface finish and finer accuracy.

• No more cycle stops or prepping the wheel
• Faster cycle times
• Chevalier control: touch screen
• 3-Axes Fully Automatic
• Table size: up to 16"W x 40"L
• Auto. dressing and compensation optional
• Elevation is driven by servo motor
• 3-Axes needle roller way
• Max. grinding sizes: up to 16" x 40"
 
• Spindle power: up to 10 HP, greater spindle HP available

Specifications

DESCRIPTION FSG-1224ADIII FSG-1632ADIII FSG-1640ADIII
Table Size 11 3/4" x 23 5/8" 15 3/4" x 31 1/2" 15 3/4" x 31 1/2"
Max Grinding Length Longitudinal 24" 32" 40"
Max Grinding Width Crosswise 12" 16" 16"
Max Distance from Table Surface to Spindle Centerline 24" 24" 24"
Longitudinal Movement of Table: Longitudinal Travel, Hydraulic 25 5/8" 15 3/4" x 31 1/2" 15 3/4" x 31 1/2"
Maximum Travel, Manual 27 1/2" 35 3/8" 43 1/4"
Table Speed, infinitely variable 5~25 m/min. 5~25 m/min. 5~25 m/min.
Rapid travel, approx. 3.5m/min. 3.5m/min. 3.5m/min.
Automatic Transverse Increment 2.9m/min. 2.9m/min. 2.9m/min.
Maximum Automatic Travel 12" 16" 16"
Maximum Manual Travel 13 3/4" 18" 18"
Handwheel per revolution 0.25" 0.25" 0.25"
Handwheel per graduation 0.0025" 0.0025" 0.0025"
Microfeed per revolution 0.005" 0.005" 0.005"
Microfeed per graduation 0.00005" 0.00005" 0.00005"
Wheelhead Vertical Infeed: Automatic Infeed 0.000050"-0.002" 0.000050"-0.002" 0.000050"-0.002"
Rapid Travel, approx 25ipm 25ipm 25ipm
Grinding Spindle Drive Speed 60Hz1750rpm; 50Hz1450rpm 60Hz1750rpm; 50Hz1450rpm 60Hz1750rpm; 50Hz1450rpm
Power rating 5HP/4P 5HP/4P 5HP/4P
Get a Quote

Related Products

Sorry, No Related Products Available

Please click here for printable specs