info@jonesmachinery.com 800-766-0024 513-825-5000

DPMSX2P

  • ProtoTRAK DPM SX2P
  • SMX Control
  • SMX Control (2)
ProtoTRAK DPM SX2P SMX Control SMX Control (2)

Description

ProtoTRAK SMX System Specifications

(O) indicates optional feature

 

ProtoTRAK System Hardware

·         ProtoTRAK SMX CNC

·         Two- or three-axis CNC, 3-axis DRO

·         Real handwheels for manual operation

·         10.4” color active-matrix screen

·         Industrial-grade Pentium® processor

·         1 GB Ram

·         4 USB connectors

·         Override of program feedrate

·         LED status lights built into display

·         RJ45 Port and Ethernet card (O)

·         Override of program spindle speed (O)

·         USB Thumb drive flash memory 512 or more (O)

·         Uncluttered front panel with few hard keys

·         Integrated Ram and Quill encoders resolve to one Z dimension

 

Software Features – general operation

·         Clear, uncluttered screen display

·         Prompted data inputs

·         English language – no codes

·         Soft keys - change within context

·         Windows® operating system

·         Selectable two or three-axis CNC

·         Color graphics with adjustable views

·         Inch/mm selectable

·         Convenient modes of operation

 

DRO Mode features

·         Incremental and absolute dimensions

·         Jog at rapid with override

·         Powerfeed X, Y or Z

·         Do One CNC canned cycle

·         Teach-in of manual moves

·         Servo return to 0 absolute

·         Tool offsets from library

·         Go To Dimensions (O)

·         Spindle speed setting with manual override

·         Fine/Course handwheel resolution (O)

 

Program Mode features

·         Auto Geometry Engine (O)

·         Geometry-based programming

·         3-axis geometry programming (O)

·         Tool Path programming (O)

·         Scaling of print data (O)

·         Multiple fixture offsets (O)

·         Programming of Auxiliary Functions (O)

·         Event Comments (O)

·         Three-axis Geometry conversational programming (O)

·         Incremental and absolute dimensions

·         Automatic diameter cutter comp

·         Circular interpolation

·         Linear interpolation

·         Look –graphics with a single button push

·         List step – graphics with programmed events displayed

·         Alphanumeric program names

·         Program data editing

·         Program pause

·         Conrad – automatic corner radius

·         Programmable spindle speeds

·         Math helps with graphical interface

·         Auto load of math solutions

·         Tool step over adjustable for pocket routines

·         Pocket bottom finish pass

·         Selectable ramp or plunge cutter entry

·         Subroutine repeat of programmed events

·         Nesting

·         Rotate about Z axis for skewing data

·         Mirror of programmed events (O)

·         Copy (O)

·         Copy rotate (O)

 

·         Copy mirror (O)

Specifications

Machine Specifications

·         Table Size – 49” x 9”

·         T-Slots (number x width x pitch) - 3 x .63” x 2.5”

·         Travel (X, Y, Z axis) - 32 x 16 x 27

·         Quill Diameter - 3 3/8”

·         Maximum Quill Travel - 5”

·         Spindle Taper - R8

·         Spindle Speed Range - 40-600, 300-5000

·         Spindle Center to Column Face - 18”

·         Spindle Motor Power – 3 HP

·         Power requirements, control - 110V; 1P; 10A

·         Power requirements - 220V;3P; 11A

·         Maximum Weight of Workpiece - 1320 lbs.

·         Height of table from bottom of bed - 33”

·         Max spindle nose to table - 27”

·         Min height - 90”

·         Max height - 98”

·         Width of machine including table - 70”

·         Length with electric box door closed - 64”

·         Overall width incl full table traverse - 104”

·         Overall length with electrical door open - 72”

·         Footprint of Machine - 23 x 40”

·         Weight  net / shipping lbs.  - 3200 / 3500                              Machine shown with

·         rapid traverse X, Y, Z - 150 IPM                                            additional options

·         Auto Lube Pump

·         Precision ground ballscrews in the table, saddle and ram

·         Chrome hardened and ground quill

·         Meehanite castings

·         Slide ways are Turcite coated

·         Wide way surfaces are hardened and ground

·         Drilling  max capacity - 1”

·         Milling max capacity - 3 inch³/min

 

·         Tapping max capacity - 3 /4 - 10

Get a Quote

Related Products

Please click here for printable specs