info@jonesmachinery.com 800-766-0024 513-825-5000

DPM FHM7

  • ProtoTRAK DPM FHM7
  • SMX Control
  • SMX Control (2)
ProtoTRAK DPM FHM7 SMX Control SMX Control (2)

Description

Southwestern Industries, Inc.
TRAK DPM FHM7 Bed Mill

with the ProtoTRAK SMX CNC 

Machine Options

 

·         Glass scales for table and saddle

·         Power drawbar

·         Remote stop/go switch

·         Coolant pump

·         Spray coolant

·         Table guard

·         Halogen work lamp

·         Chip pan / splash shield

·         Vise

 

 

ProtoTRAK SMX System Specifications

(O) indicates optional feature

ProtoTRAK System Hardware

·         ProtoTRAK SMX CNC

·         Two- or three-axis CNC, 3-axis DRO

·         Real handwheels for manual operation

·         10.4” color active-matrix screen

·         Industrial-grade Pentium® processor

·         1 GB Ram

·         4 USB connectors

·         Override of program feedrate

·         LED status lights built into display

·         RJ45 Port and Ethernet card (O)

·         Override of program spindle speed (O)

·         USB Thumb drive flash memory 512 or more (O)

·         Uncluttered front panel with few hard keys

·         Ballscrew and motor assembly installed on quill

·         Electronic quill handwheel

 

Software Features – general operation

·         Clear, uncluttered screen display

·         Prompted data inputs

·         English language – no codes

·         Soft keys - change within context

·         Windows® operating system

·         Selectable two or three-axis CNC

·         Color graphics with adjustable views

·         Inch/mm selectable

·         Convenient modes of operation

DRO Mode features

·         Incremental and absolute dimensions

·         Jog at rapid with override

·         Powerfeed X, Y or Z

·         Do One CNC canned cycle

·         Teach-in of manual moves

·         Servo return to 0 absolute

·         Tool offsets from library

·         Go To Dimensions (O)

·         Spindle speed setting with manual override (O)

·         Fine/Course handwheel resolution

 

Program Mode features

·         Auto Geometry Engine (O)

·         Geometry-based programming

·         3-axis geometry programming (O)

·         Tool Path programming (O)

·         Scaling of print data (O)

·         Multiple fixture offsets (O)

·         Programming of Auxiliary Functions

·         Event Comments (O)

·         Three-axis Geometry conversational programming (O)

·         Incremental and absolute dimensions

·         Automatic diameter cutter comp

·         Circular interpolation

·         Linear interpolation

·         Look –graphics with a single button push

·         List step – graphics with programmed events displayed

·         Alphanumeric program names

·         Program data editing

·         Program pause

·         Conrad – automatic corner radius

·         Programmable spindle speeds

·         Math helps with graphical interface

·         Auto load of math solutions

·         Tool step over adjustable for pocket routines

·         Pocket bottom finish pass

·         Selectable ramp or plunge cutter entry

·         Subroutine repeat of programmed events

·         Nesting

·         Rotate about Z axis for skewing data

·         Mirror of programmed events (O)

·         Copy (O)

·         Copy rotate (O)

 

·         Copy mirror (O)

Specifications

TRAK DPM FHM7 Bed Mill

with the ProtoTRAK SMX CNC

 

Machine specifications

·         Table size – 76” x 14”

·         T-slots (number x width x pitch) – 3 x 63” x 2.48”

·         Travel (X, Y, Z axis) – 60” x 23” x 20.5”

·         Quill diameter – 5.06”

·         Spindle taper – NMTB 40

·         Spindle speed range RPM – 200-5000

·         Spindle center to column face – 23”

·         Spindle motor power – 7.5 HP

·         Power requirement – 3 phase, 220V, 60 HZ; 37.5 FLA

·         Power Requirement Control – 110V; 1 phase; 15A

·         Maximum weight of workpiece – 2200 lbs.

·         Height of table from bottom of bed – 38.25”

·         Maximum spindle nose to table – 24”

·         Minimum height – 95.5”        

·         Maximum height – 101”

·         Width of machine including table – 110.5”

·         Length with electric box door closed – 93.75”

·         Overall width including full table travel – 171.65”

·         Overall length with electrical door open – 119.5”

·         Footprint – 42.52” x 63”

·         Way surface – dovetail X axis; square ways Y and Z axis

·         Weight (approximate) net – 7650 lbs.

·         Weight (approximate) shipping – 7975 lbs.

·         Maximum work capacities – Drilling (mild steel) max. dia. 1.00”; tapping, 5/8”; milling capacities, 7 inch3/min

·         Way surfaces hardened and ground

·         Turcite coating on all slide ways

·         Automatic lubrication pump

·         Auxiliary function hardware

 

·         Limit switches

Get a Quote

Related Products

Please click here for printable specs