info@jonesmachinery.com 800-766-0024 513-825-5000

DPM EX2P

  • ProtoTRAK DPM EX2
  • EMX Control
ProtoTRAK DPM EX2 EMX Control

Description

DPM EX2 Bed Mill Specifications

with the ProtoTRAK EMX Control

Machine Options

·         440 Volt option for spindle power

·         Remote Stop/Go switch

·         Power Drawbar

·         Halogen Worklamp

·         Chip Pan / Splash Shield

·         Coolant Pump

·         Spray Coolant

·         Table Guard Enclosure

·         USB Memory

·         Vise

 

ProtoTRAK EMX CNC

Control Hardware Specifications

·         Two or Two and 1/2-axis CNC, three-axis DRO

·         Digital Servo Amplifiers – custom designed for ProtoTRAK operation

·         D.C. Servo Motors – rated at 280 in-oz. Continuous torque are twice that required

·         Precision Rolled Ballscrews – in the table, saddle and column

·         Modular Design – simplifies service and maximized uptime

·         115V/60HZ/15 amps

·         Feedrate Override of programmed feedrate and rapid

·         Polycarbonate Sealed Membrane Keypad and Gasket Sealed Control

·         Enclosures to lock out contamination

·         7.4” LCD with adjustable contrast

·         Internal memory for part program storage

·         Rugged Industrial PC

·         2 USB ports for interface with a storage device

·         Integrated ram and quill encoders resolve to one Z dimension

 

Software

·         Part geometry programming – the tool path is generated for you automatically

·         Diameter Cutter Compensation – allows programming of the part rather than the center of the tool path

·         Circular interpolation – makes arcs and any size hole easy to do with standard tools

·         Linear Interpolation – to machine lines at any angle

·         Conrad – provides automatic corner radius programming with one data input

·         Incremental and Absolute – programming can even be mixed within an event

·         Error Messages – to identify programming mistakes

·         Fault Messages – for system self-diagnostics

·         Program Downloading – from offline CAD/CAM systems via a modified FANUC 6 post-processor

·         Teach – to program manual position and mill moves

·         Parts Graphics display

·         Look – a single button press to view graphics during programming

·         Math Help – for finding points in a prompted format with graphical representation of prompts

·         Machine Tool Error Compensation and Backlash Compensation custom set on mill after installation

·         Selectable Inch/mm measurement readout

·         Jog of X and Y from 1 to 100 inches per minute

·         Continue Mill to eliminate repetitive data inputs while programming

 

 

Programmed Canned Cycles

·         Posn/Drill – single point

·         Bolt Hole – series of points evenly spaced around a circle

·         Mill – straight line in any direction

·         Arc – any portion of a circle

·         Pocket – a rectangle or circle and all the material inside, includes finish cut

·         Frame – a perimeter of a rectangle or circle, includes finish cut

·         Repeat – of programmed events with or without offset

 

Specifications

DPM EX2 Bed Mill Specifications

with the ProtoTRAK EMX Control

 

Machine Specifications

·         Table Size – 49” x 9”

·         T-Slots (number x width x pitch) - 3 x .63” x 2.5”

·         Travel (X, Y, Z axis) - 32 x 16 x 23.5

·         Quill Diameter - 3 3/8”

·         Maximum Quill Travel - 5”

·         Spindle Taper - R8

·         Spindle Speed Range – 60 – 4200 RPM

·         Spindle Center to Column Face - 18”

·         Spindle Motor Power – 3 HP

·         Power requirements, control - 110V; 1P; 10A

·         Power requirements – 220/440V; 3P; 8.5/4.3A

·         Maximum Weight of Workpiece - 1320 lbs.

·         Height of table from bottom of bed - 33”

·         Max spindle nose to table - 27”

·         Min height - 90”

·         Max height - 98”

·         Width of machine including table - 70”

·         Length with electric box door closed - 64”

·         Overall width incl full table traverse - 104”

·         Overall length with electrical door open - 72”

·         Footprint of Machine - 23 x 40”

·         Weight  net / shipping lbs.  - 3200 / 3500

·         Rapid traverse X, Y, Z - 100 IPM

·         Auto Lube Pump

·         Precision rolled ballscrews in the table, saddle and column

·         Chrome hardened and ground quill

·         Meehanite castings

·         Slide ways are Turcite coated

·         Wide way surfaces are hardened and ground

·         Drilling  max capacity - 1”

·         Milling max capacity - 3 inch³/min

 

·         Tapping max capacity - 3 /4 - 10

Get a Quote

Related Products

Please click here for printable specs